FCC Regulations require products subject to authorization under a Declaration of Conformity to be labeled as follows:
The label shall be located in a conspicuous location on the device and shall contain the unique identification described in §2.1074 of CFR 47 and the following logo:
If the product is authorized on testing of the product or system:

If a personal computer is authorized based on assembly using separately authorized components, in accordance with §15.101©(2) or©(3), and the resulting product is not separately tested:

Label text and information should be in a size of type large enough to be readily legible, consistent with the dimensions of the equipment and the label. However, the type size for the text is not required to be larger than eight point.
When the device is so small or for such use that it is not practicable to place the statement specified on it, such as for a CPU board or a plug-in circuit board peripheral device, the text associated with the logo may be placed in a prominent location in the instruction manual or pamphlet supplied to the user. However, the unique identification (trade name and model number) and the logo must be displayed on the device.
The label shall not be a stick-on, paper label. The label on these products shall be permanently affixed to the product and shall be readily visible to the purchaser at the time of purchase, as described in §2.925(d). “Permanently affixed” means that the label is etched, engraved, stamped, silk screened, indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment or on a nameplate of metal, plastic, or other material fastened to the equipment by welding, riveting, or a permanent adhesive. The label must be designed to last the expected lifetime of the equipment in the environment in which the equipment may be operated and must not be readily detachable.
Refer to:
http://strategis.ic.gc.ca/epic/site/ceb-bhst.nsf/en/h_tt00016e.html
Title 47 CFR
Part 2, Section 1074
Part 15, Section 101©(2) or©(3)
Part 2, Section 925(d)
Part 15, Section 19
NOTE: Information deemed reliable and accurate at the time posted; users should refer to actual applicable sections of the official referenced materials.
NORTHWEST EMC - (888) 364-2378 - EMC & EMI Testing - Located in Oregon, Washington and California.